P-661HW-D Series Support Notes
Step 5: From general tab select TCP/IP and click property
Step 6: Fill in your network IP address and subnet mask and click OK to finish.
Configuration for Wireless Station B
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-300 wireless NIC
card please follow the following step.
Step1: Double click on the utility icon in your windows task bar the utility will
pop up on your windows screen.
Step 2: Select configuration tab.
113
All contents copyright © 2006 ZyXEL Communications Corporation.
To Next Page
Loading...
