ZyXEL Communications P-661HW-D Series - Firmware;Configurations Uploading and Downloading Using TFTP; Using TFTP Client Software

P-661HW-D Series Support Notes
2. Firmware/Configurations Uploading and Downloading using TFTP
• Using TFTP client software
• Upload/download ZyNOS via LAN
• Upload/download Prestige configurations via LAN
(1) Using TFTP to upload/download ZyNOS via LAN
Step 1: TELNET to your Prestige first before running the TFTP software
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout
in Command Line Interface (CLI)
Step 3: Run the TFTP client software
Step 4: Enter the IP address of the Prestige
Step 5:To upload the firmware, please save the remote file as 'ras' to
Prestige. After the transfer is complete, the Prestige will program the upgraded
firmware into FLASH ROM and reboot itself.
An example:
139
All contents copyright © 2006 ZyXEL Communications Corporation.