ZyXEL Communications P-661HW-D Series - Configuring Infrastructure Mode

P-661HW-D Series Support Notes
Step 5: From general tab select TCP/IP and click property
Step 6: Fill in your network IP address and subnet mask and click OK to finish.
Step 7: Station A now are able to connect to Station B.
2. Configuring Infrastructure mode
Infrastructure Introduction
For Infrastructure WLANs, multiple Access Points(APs) like the WLAN to the
wired network and allow users to efficiently share network resources. The
Access Points not only provide communication with the wired network but also
mediate wireless network traffic in the immediate neighborhood.
115
All contents copyright © 2006 ZyXEL Communications Corporation.