Copyright © 2013 ZyXEL Communications Corp. All rights reserved.
Step 2. Setup the Internet connection.
(1) The PC NIC setting is DHCP client and the default gateway will be 172.16.0.1.
(2) Use a web browser and enter http://172.16.0.1 to access the UAG4100’s login GUI
(user: admin/password:1234).
(3) After logging into the UAG’s GUI, you will see the “Installation Setup Wizard”, and
then click on the “Next” button.
(4) Select your Internet Service Provider parameters (on the UAG, there are 3 types:
Ethernet, PPPoE, and PPP).
(5) After configuring the Internet connection setting, you can click on the “Finish”
button to complete the Wizard Setup.
To Next Page
Loading...
