Need help?Do you have a question about the ZyXEL Communications ZYWALL USG 20W and is the answer not in the manual?
General| Maximum VPN Tunnels | 50 |
|---|---|
| WAN Ports | 2 |
| LAN Ports | 4 |
| USB Ports | 1 |
| DMZ Ports | 1 |
| VLANs | 256 |
| Wireless | No |
| Humidity | 10% to 90% (non-condensing) |
| Interfaces | Ethernet, USB |
| Power Supply | 12V DC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Describes the purpose of a WAN connection and the USG's multiple WAN feature for Internet access.
Provides step-by-step instructions for configuring PPPoE and 3G interfaces for failover.
Explains how to balance traffic across multiple WAN connections for improved service quality and utilization.
Details how to direct specific traffic types (e.g., VoIP) over designated WAN connections using Policy Route.
Illustrates a scenario where VoIP traffic uses WAN1 and HTTP traffic uses WAN2, with load balancing for other traffic.
Guides users through configuring policy routes for VoIP and HTTP traffic, and setting up WAN trunks for load balancing.
Explains how to map traffic from the Internet to internal servers for service availability and protection.
Provides steps for configuring NAT (Port Forwarding) to allow external access to internal servers like FTP.
Introduces secure site-to-site communication using IPSec VPN tunnels over the Internet for connecting remote locations.
Outlines the IPSec VPN conditions and goals for building a secure tunnel between two ZyWALL devices.
Describes secure remote access for mobile users to corporate resources via IPSec VPN.
Details IPSec VPN conditions and goals for establishing tunnels for mobile user access.
Explains SSL VPN for easy remote access to company resources, requiring only a browser.
Outlines network conditions and goals for setting up SSL VPN for tele-workers to access VNC servers or file shares.
Discusses managing bandwidth to prioritize sensitive VoIP traffic over other network traffic.
Details enabling SIP ALG and configuring Bandwidth Management (BWM) for VoIP traffic priority.
Focuses on prioritizing a superior user's traffic and limiting sessions per host to ensure smooth operation.
Guides on setting up BWM for priority-based traffic management and limiting concurrent sessions per host.
Explains how to use Application Patrol to manage P2P traffic, blocking it during office hours and limiting it otherwise.
Details configuring schedules and App Patrol to block or limit P2P applications based on office hours.
Introduces ZyXEL Safe Browsing (ZSB) for enhancing web browsing safety and protecting against malicious sites.
Describes restricting employee web access during office hours while allowing manager unrestricted access.
Guides on enabling Content Filter, setting up policies for different user groups, and defining schedules.
Explains how to allow WLAN users to access LAN services by configuring firewall policies and security groups.
Provides steps to configure WLAN interface settings and bridge them to the LAN zone for access.
To Next Page
