ZyXEL Communications ZYWALL USG 20W - 8.2 Configuration Guide

ZyXEL – ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
62
8.2 Configuration Guide
Network Conditions:
- WAN download bandwidth: 2M
- WAN upload bandwidth: 1M
- Manager’s PC IP: 192.168.1.50
Goal to achieve:
Guarantee manager’s internet surfing traffic going smoothly. Limit each user’s session numbers to prevent any user from using up too many sessions.
ZLD configuration
ZyNOS configuration
<< ZyWALL USG50 configuration steps >>
Step 1. Go to Configuration > Object > Address, add an address object for the
manager. manager_IP: 192.168.1.50
Step 1. Go to ADVANCED > BW MGMT > Summary.
Enable BWM on WAN1. Set the speed to 1000kbps (upload bandwidth). Set
the scheduler to Priority-Based. Enable Maximize Bandwidth Usage.
Enable BWM on LAN. Set speed to 2000kbps (download bandwidth). Set the
scheduler to Priority-Based. Enable Maximize Bandwidth Usage.