Copyright © 2013 ZyXEL Communications Corp. All rights reserved.
Step 4-1. Setup your printer
SP350E printer will be assigned an IP address by the DHCP by default. First, you need
to verify the IP address of the printer.
(1) Please turn over the printer. You can see the
printer MAC address
label at the
bottom.
(2) Please
record printer MAC on memo
.
(3) Go to Dashboard. Click on “DHCP Table”.
(4)
Mapping the printer MAC address
– this is what you have recorded in Step
4-1-(2) ). If correct, enable the “Reserve” checkbox.
To Next Page
Loading...
