EasyManuals Logo

ZyXEL Communications USG60 Initial Setup

ZyXEL Communications USG60
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1/9
www.zyxel.com
ZLD Initial Setup (4.25 Firmware)
This guide will provide initial setup instructions to get the ZyWALL/USG connected to
the internet.
Supported Devices
ZyWALL 110 Firmware version 4.25 and newer
ZyWALL 310 Firmware version 4.25 and newer
ZyWALL 1100 Firmware version 4.25 and newer
USG40 Firmware version 4.25 and newer
USG40W Firmware version 4.25 and newer
USG60 Firmware version 4.25 and newer
USG60W Firmware version 4.25 and newer
USG110 Firmware version 4.25 and newer
USG210 Firmware version 4.25 and newer
USG310 Firmware version 4.25 and newer
USG1100 Firmware version 4.25 and newer
USG1900 Firmware version 4.25 and newer
USG20-VPN Firmware version 4.25 and newer
USG20W-VPN Firmware version 4.25 and newer
Scenario
This guide covers first time setup for internet access on ZyWALL (ZLD)
routers.

Other manuals for ZyXEL Communications USG60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZyXEL Communications USG60 and is the answer not in the manual?

ZyXEL Communications USG60 Specifications

General IconGeneral
Firewall Throughput3 Gbps
VLAN supportYes
Power SupplyAC 100-240 V ~ 50/60 Hz
Routing protocolsOSPF, BGP, RIP
Interfaces5 x GbE RJ-45

Related product manuals