WAN Setup Wizard
The initial setup wizard will appear when logging-in to the ZyWALL’s
WebUI for the first time. Follow the prompts to setup the WAN port
connection. Click Next to run the wizard setup for internet access.
Note: If the “Installation Setup Wizard” does not appear when you login you can still run the wizard manually.
Please refer to the “Troubleshooting Tips” at the end of this guide.
Set the ISP Parameters for the internet connection and IP Address
Assignment. Click Next to continue the setup wizard.
ISP Parameters: Encapsulation options include Ethernet, PPP over Ethernet (PPPoE),
and PPTP. If you are unsure of the encapsulation parameters used by your ISP, leave
To Next Page
Loading...
