ZyXEL Communications VMG4005-B60A - Page 24

Chapter 4 Status
VMG4005-B50A/B60A User’s Guide
24
Figure 17 System Info: Detailed Information
Each field is described in the following table.
Table 5 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the VMG system name. It is used for identification.
Model Name This shows the model number of your VMG.
Serial Number This field displays the serial number of the VMG.
Firmware Version This is the current version of the firmware on the VMG.
System Up Time This field displays how long the VMG has been running since it last started up. The VMG starts
up when you plug it in, when you restart it (Maintenance > Reboot), or when you reset it.
Interface Status
Virtual ports are shown here. You can see whether the ports are in use and their transmission rate.
WAN Information (These fields display when you have an Internet connection.)
Encapsulation This field displays the current encapsulation method.
IP Address This field displays the current IPv4 address of the VMG in the WAN.
IP Subnet Mask This field displays the current subnet mask in the WAN.
IPv6 Address This field displays the current IPv6 address of the VMG in the WAN.
MAC Address This shows the WAN Ethernet adapter MAC (Media Access Control) address of your VMG.
Primary DNS
server
This field displays the first DNS server address assigned by the ISP.
Secondary DNS
server
This field displays the second DNS server address assigned by the ISP.
Primary DNSv6
server
This field displays the first DNS server IPv6 address assigned by the ISP.
Secondary
DNSv6 server
This field displays the second DNS server IPv6 address assigned by the ISP.