ZyXEL Communications VMG4005-B60A - 16.3 Reboot

Chapter 16 Backup/Restore
VMG4005-B50A/B60A User’s Guide
56
Figure 39 Reset Warning Message
Figure 40 Reset In Process Message
You can also press the RESET button on the bottom panel to reset the factory defaults of your VMG.
Refer to Section 1.5.4 on page 13 for more information on the RESET button.
16.3 Reboot
System Reboot allows you to reboot the VMG remotely without turning the power off. You may need to
do this if the VMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the VMG reboot. This does not affect the VMG's
configuration.