ZyXEL Communications VMG4380-B10A - The LAN VLAN Screen

Chapter 8 Home Networking
VMG4380-B10A / VMG4325-B10A User’s Guide
151
Figure 58 Network Settings > Home Networking > 5th Ethernet Port
The following table describes the fields in this screen.
8.10 The LAN VLAN Screen
Click Network Setting > Home Networking > LAN VLAN to open this screen. Use this screen to
control the VLAN ID and IEEE 802.1p priority tags of traffic sent out through individual LAN ports.
Figure 59 Network Setting > Home Networking > LAN VLAN
The following table describes the labels in this screen.
Table 37 Network Settings > Home Networking > 5th Ethernet Port
LABEL DESCRIPTION
State Select Enable to use the Ethernet WAN port as a LAN port on the Device.
Apply Click Apply to save your changes back to the Device.
Cancel
Click Cancel to exit this screen without saving.
Table 38 Network Setting > Home Networking > LAN VLAN
LABEL DESCRIPTION
Lan Port These represent the Device’s LAN ports.
Tag Operation Select what you want the Device to do to the IEEE 802.1q VLAN ID and priority tags of
downstream traffic before sending it out through this LAN port.
• Unchange - Don’t do anything to the traffic’s VLAN ID and priority tags.
• Add - Add VLAN ID and priority tags to untagged traffic.
• Remove - Delete one tag from tagged traffic. If the frame has double tags, this removes
the outer tag. This does not affect untagged traffic.
• Remark - Change the value of the outer VLAN ID and priority tags.