Chapter 20 VPN
VMG8924-B10A User’s Guide
221
Figure 136 Security > IPSec VPN: Add/Edit
This screen contains the following fields:
Table 103 Security > IPSec VPN: Add/Edit
LABEL DESCRIPTION
Active Select this to activate this VPN policy.
IPSec Connection
Name
Enter the name of the VPN policy.
Remote IPSec
Gateway Address
Enter the IP address of the remote IPSec router in the IKE SA.
Tunnel access
from local IP
addresses
Select Single Address to have only one local LAN IP address use the VPN tunnel. Select
Subnet to specify local LAN IP addresses by their subnet mask.
To Next Page
Loading...
