Appendix A Setting up Your Computer’s IP Address
VMG8924-B10A User’s Guide
343
2 Select Ethernet built-in from the Connect via list.
Figure 214 Macintosh OS 8/9: TCP/IP
3 For dynamically assigned settings, select Using DHCP Server from the Configure: list.
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Device in the Router address box.
5 Close the TCP/IP Control Panel.
6 Click Save if prompted, to save changes to your configuration.
7 Turn on your Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
Macintosh OS X
1 Click the Apple menu, and click System Preferences to open the System Preferences window.
Figure 215 Macintosh OS X: Apple Menu
2 Click Network in the icon bar.
•Select Automatic from the Location list.
To Next Page
Loading...
