Need help?Do you have a question about the ZyXEL Communications VSG1432-B101 - V1.10 and is the answer not in the manual?
General| Device Type | Gateway |
|---|---|
| Model | VSG1432-B101 |
| Firmware Version | V1.10 |
| WAN Ports | 1 |
| LAN Ports | 4 |
| Wireless Frequency Bands | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Security | WEP, WPA, WPA2 |
| USB Ports | 1 x USB 2.0 |
| QoS | Yes |
| VLAN Support | Yes |
| DSL Interface | RJ-11 |
| Antennas | 2 x External |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Power Supply | 12 V DC, 1 A |
| Wireless Standard | 802.11b/g/n |
| ADSL Standards | ITU-T G.992.1 (G.dmt) |
| ADSL2 Standards | G.992.3 |
| ADSL2+ Standards | ITU-T G.992.5 |
| VDSL2 Standards | G.993.2 |
| Firewall | NAT, SPI |
| VPN Support | IPSec, PPTP, L2TP |
| Management | Web-based GUI |
Describes the web configurator as an HTML-based interface for device setup and management via browser.
Provides step-by-step instructions on how to access the device's web-based management interface.
Guides users through the initial setup process, including time zone, PPPoE connection, and wireless settings.
Provides a tutorial on configuring the Internet connection using the Web Configurator for ADSL PPPoE.
Guides users on setting up a secure wireless network using WPS or manual configuration.
Explains how to configure NAT port forwarding to make local servers accessible from the internet.
Explains how to enable Wireless LAN, enter SSID, and select wireless security mode.
Details how to allow or deny wireless clients based on their MAC addresses.
Guides users on configuring WiFi Protected Setup (WPS) for quick wireless network setup.
Explains how to set the LAN IP address, subnet mask, and DHCP settings for the ZyXEL Device.
Defines Quality of Service (QoS) and its role in delivering data with minimum delay and controlling bandwidth usage.
Explains how to enable/disable QoS and set upstream bandwidth.
Guides users on adding, editing, or deleting QoS classifiers to group traffic based on criteria.
Discusses configuring NAT on the ZyXEL Device, including its purpose and basic functionality.
Guides on forwarding incoming service requests to local network servers.
Explains how to add and configure port triggering settings for dynamic service access.
Guides on enabling DDNS and configuring the necessary settings on the ZyXEL Device.
Introduces the ZyXEL Device firewall for protecting the network from Internet attacks.
Guides users on setting the security level of the firewall and configuring packet travel direction rules.
Details how to configure incoming/outgoing filtering rules for IP traffic.
Explains how to configure the ZyXEL Device to grant or exclude specific devices based on MAC addresses.
Describes the screen for changing MAC filter settings and adding new MAC filter rules.
Guides on configuring parental control settings to block users from accessing specific websites.
Guides on configuring IPSec policies, viewing tunnels, and adding/editing VPN policies.
Details the screen for managing user accounts, including user name, security, and lockout settings.
Explains how to upload new firmware to the ZyXEL Device to upgrade its performance.
Guides users on the process of uploading new firmware via the web configurator.
Provides solutions for problems related to power, hardware connections, and LED indicator behavior.
Offers troubleshooting steps for issues related to accessing and logging into the ZyXEL Device.
Provides solutions for problems preventing access to the Internet via DSL or Ethernet WAN connections.
To Next Page
