ZyXEL Communications VSG1432-B101 - V1.10 - IGMP Host Limitation Edit

Chapter 14 IGMP
VSG1432-B101 Series User’s Guide
206
14.3.1 IGMP Host Limitation Edit
Use this screen to control a LAN host’s access to IGMP services through the ZyXEL
Device. Click Network Settings > IGMP Setting > IGMP Filter and then a LAN
host’s Edit icon to open the following screen.
Figure 83 Network Settings > IGMP Setting > IGMP Filter > LAN Host Edit
The following table describes the fields in this screen.
Table 58 Network Settings > IGMP Setting > IGMP Filter > LAN Host Edit
LABEL DESCRIPTION
LAN Host This is the IP address of one of the ZyXEL Device’s LAN hosts.
IGMP Enabled Select whether or not the LAN device using the specified IP address is
allowed to access IGMP services through the ZyXEL Device.
Max Allowed
Channels
Specify to how many IGMP channels the LAN device is allowed to
subscribe.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to exit this screen without saving.