Chapter 1 Introducing the VSG1432-B101
VSG1432-B101 Series User’s Guide
32
To activate WPS:
1 Make sure the POWER LED is on and not blinking.
2 Press the WLAN/WPS button for five seconds and release it.
3 Press the WPS button on another WPS-enabled device within range of the ZyXEL
Device. The WLAN/WPS LED flashes green and orange while the ZyXEL Device
sets up a WPS connection with the other wireless device.
4 Once the connection is successfully made, the WLAN/WPS LED shines green.
To turn off the wireless network, press the WLAN/WPS button on the front of the
ZyXEL Device for one to five seconds. The WLAN/WPS LED turns off when the
wireless network is off.
To Next Page
Loading...
