ZyAIR B-3000
5
Note: Even though you can connect to the ZyAIR wirelessly, it is recommended that you connect your
computer to the ETHERNET port for initial configuration.
1 Launch your web browser. Enter 192.168.1.2 (the
ZyAIR’s default IP address) as the address.
If the login screen does not display, see Section
6.1 on page 10 to set your computer’s IP address.
2 Click Login (the default password 1234 is already
entered).
3 Change the login password by entering a new
password and clicking Apply.
To Next Page
Loading...
