ZyXEL Communications ZyWALL USG FLEX 100 - Page 241

241/782
www.zyxel.com
9 Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and Inbound(Bytes)/Outbound(Bytes) Traffic.
MONITOR > VPN Monitor > IPSec
10 Go to ZyWALL/USG_Branch MONITOR > Log. Try to disconnect WAN1 interface
(172.1.1.30.68) and you will see the VPN tunnel failover to WAN2 interface
(172.100.20.78).
MONITOR > Log