ZyXEL Communications ZyWALL USG FLEX 100 - Set up the Bandwidth Management for FTP on the Zywall;Usg

603/782
www.zyxel.com
CONFIGURATION > BWM > Configuration > Add Policy
Set Up the Bandwidth Management for FTP on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > BWM > Configuration > Add Policy,
select Enable and type FTP Any-to-Any as the policy’s Description.
Note: In Bandwidth Shaping, the highest priority is (1) the lowest priority is (7).