695/782
2002:7a64:dcee:1::111/128.
In the ZyWALL/USG, go to CONFIGURATION > Network > Interface > Ethernet >
lan1, Select Enable Interface and Enable IPv6. Type 2002:7a64:dcee:1::111/128 in
the IPv6 Address/Prefix Length field for the LAN1’s IP address.
Enable Router Advertisement. Then click Add in the Advertised Prefix Table to add
2002:7a64:dcee:1::/64. The LAN1 hosts will get the network prefix through the
router advertisement messages sent by the LAN1 IPv6 interface periodically. Click
OK.
CONFIGURATION > Network > Interface > Ethernet > lan1 > General Settings
CONFIGURATION > Network > Interface > Ethernet > lan1 > IPv6 Router
Advertisement Setting
To Next Page
Loading...
