18 19
Replacing the Belt
• The belt is a consumable part. Replace the belt if the speed of playback slows down
or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a
year.
• Before replacing the belt, be sure to disconnect the product’s AC adapter from the
outlet.
1. Remove the slip mat.
2. Remove the main platter, and then remove the old belt.
3. Loop the new belt around the sub-platter and motor pulley.
4. Place the main platter back onto the sub-platter.
5. Using your hands, slowly rotate the platter ten times by hand in the direction
of the arrow.
Figure 1
When the Turntable is Moved
Using the product's original packing materials, wrap the turntable in the reverse order
from when you unwrapped it. If you do not have the packaging materials, take the
following measures:
• After disconnecting the AC adapter from the outlet, remove the felt mat and platter,
and then wrap them so that they do not get damaged.
• Attach the protector to the cartridge.
• Use a string or something similar to tie the tonearm to the rest so that it does not
move.
• Wrap the turntable body with paper or a soft cloth so that it does not get damaged.
To Next Page
Loading...
Need help?
General
