9
Closing & Pack up
TM
PANTHER USER MANUAL
1. Bedding can be left in the PANTHER. Before closing, fold all bedding and stow neatly against
PANTHER lid.
2. Remove all window and canopy stay rods and stow in supplied bag.
Bedding will stow here when closed
NOTE: The amount of bedding left in tent may affect closure. If tent is not folding and closing
smoothly, bedding may be too bulky and must be removed. Forcing closure may put undue
pressure on components and cause failure which will not be covered by warranty.
3. Separate y from baseboard by releasing both hook & loop strips.
IMPORTANT! Fly must be separated from baseboard before attempting to fold.
If not separated, tent will not fold smoothly. Do not force closure!
NOTE: Failure to do this will put stress on components and stitching which will not be covered
by warranty
To Next Page
Loading...
