6
Opening & Set up
TM
PANTHER USER MANUAL
1. To open the Panther, release the hook and loop safety straps and pull down the over-centre
latches to unhook.
2. Before rst use, t handle.
Locate rubber washers and place over allocated holes between hook & loop safety straps.
Insert hex bolts through handle and feed through lid. Screw nut from behind and tighten with
supplied tools.
3. Lift Panther lid until gas struts take over. Use pull straps to control strut speed and sudden
stop. Important this is done every use.
To Next Page
Loading...
