2gig Technologies Touch Screen Wireless Keypad User Manual

INSTALL INSTRUCTIONS
Thisdocumentdescribesthebasicinstallationinformationforthe2GIG‐
TS1andthestepsnecessaryto“pair”(orlearnin)theTouchscreen
WirelessKeypadtotheControlPanel.
Box Contents
•2GIG‐TS1
•ACPowerSupply
•ACPowerSupplyBracket
•Screwsandanchors
TIP: TheboxcontentswillvarydependingonwhethertheTS1was
purchasedaspartofakitornot.
BEFORE YOU BEGIN
Is the 900 MHz Transceiver installed in the Panel?
FortheTS1tocommunicatewiththeControlPanel,the900MHz
Transceiver(2GIG‐XCVR2)mustbealreadybeinstalledintheControl
Panel.
Does the TS1 firmware version match the Control
Panel firmware version?
TheTS1andtheControlPanelarerequiredtohavethesamefirmware
versiontofullycommunicatewitheachother(e.g.CPv1.10andTS1
v1.10).
To check for matching firmware versions
1 FromboththeTS1andControlPanelHomeScreen,chooseSecurity
/Menu/Toolbox.
2 FromtheToolboxScreen,usethe→arrowunlyouseetheVersion
Screen.
TS1 Version Screen
Control Panel Version Screen
TS1 PRODUCT OVERVIEW
TheModel2GIG‐TS1TouchScreenWirelessKeypadisaremotecontrol
devicethatoffersthefunctionalityofasystemkeypadbutalsoextends
allusercontrolofthe2GIGControlpaneltootherlocationsinauser’s
home.UsingtheTS1,userscancontrollights,thermostatanddoorlocks
andseethest
atusofeve
ryzoneintheirhomeusingtheexactsameand
familiarinterfacefoundontheControlPanel.Thekeypadisdesignedfor
indooruseonly.
IMPORTANT: NotforUL985installations.
Thepanelandbuttonsserveascontrolsaswellasindicators.
Pressingthe(Emergency)buttondisplaysemergencyiconsonthe
displayforPanic,Fire,andEmergencyalarmactivation(eachhas
programmableoptionsandcanbeenabledordisabled).Pressingthe
(Home)buttonchangesthesystemdisplaytotheHomeScr
een.The
ke
ypadispoweredfromaplug‐inpowersupply.The2GIG‐TS1ex changes
informationthroughasecure2‐wa ywirelessconnectionwiththeControl
Panel.
NOTE: BeforeusingtheTS1itmustbe“learned”intotheControl
Panel.
Mounting Tools
SomespecialtoolsmayberequiredtomounttheTS1ontothewall:
•Screwdriver
•Pencil
•Wirestripper
•Staplegun
•Drywallsaw(orequivalent)
• Ladder
PREPARING THE KEYPAD
NOTE: CheckthattheTS1Keypadisfunctioningbeforeselectinga
locationfortheKeypad.
1 Remove the screw.
2 Flip open the back cover of the TS1.
3 Disconnect the hanging strap.
4 Use the back cover as the mounting plate.
2GI
Touch Screen Wireless Keypad
ForRemoteControlofthe2GIG SecuritySystem

2gig Technologies Touch Screen Wireless Keypad Specifications

General

Brand	2gig Technologies
Model	Touch Screen Wireless Keypad
Category	Keypad
Language	English