2N Access Unit M - Page 10

2N TELEKOMUNIKACE a.s., www.2n.cz 10/56
Main Units
Part No. 916116
2N Access Unit M Touch Keypad & RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader, a
touch keypad and a controller, the device is used for access control
inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916116-S
2N Access Unit M Touch Keypad & RFID 125 kHz, secured 13.56
®
MHz, NFC
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader, a touch keypad and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
License
Part No. 916012
2N Access Unit NFC license