2N Access Unit M - Components and Associated Products

2N TELEKOMUNIKACE a.s., www.2n.cz 7/56
1.1 Components and Associated Products
Main Units
Part No. 916112
2N Access Unit M 13.56 MHz, NFC ready
®
is used for reading RFID cards in the 13.56 MHz bandwidth with the
NFC support. Combining an access reader and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916112-S
2N Access Unit M secured 13.56 MHz, NFC ready
®
is used for reading secured RFID cards in the 13.56 MHz bandwidth
with the NFC support. Combining an access reader and a controller,
the device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)