2N Access Unit M - Page 8

2N TELEKOMUNIKACE a.s., www.2n.cz 8/56
Main Units
Part No. 916114
2N Access Unit M RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader and
a controller, the device is used for access control inside and outside
of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916114-S
2N Access Unit M RFID 125 kHz, secured 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader and a controller, the device is used for
access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)