Electric Locks
Part No. 932061E
BEFO 11211MB with momentary pin, mechanical blocking
low consumption
12 V / 230 mA DC
A regular lock with a built-in contact to indicate whether the
door is open or closed.
Part No. 932072E
BEFO 31211
fail safe
12 V / 170 mA DC
The reverse lock is closed when electricity is switched on.
When electricity is interrupted, the lock is opened.
Part No. 932062E
BEFO 321211
fail-safe plus door signaling
12 V / 170 mA
The reverse lock is closed when electricity is switched on.
When electricity is interrupted, the lock is opened.
It contains a built-in contact to indicate whether the door is
open or closed.
Tip
FAQ: Electric locks – Differences between locks for 2N IP access systems
To Next Page
Loading...
