360 E2 - Watch Activation and Binding Processes; Activation Process Steps; Binding Process for Parents; Important Safety Introduction

05
Activation Process
06
Binding Process
·To ensure kids safety, parents must bind and activate the watch
through the app, to fully use the phone functions. The user who
activates the watch will become the admin of the watch. Other
users can bind with the watch in the following ways:
1) Scan the QR code in the app and get approval from the admin.
2) The admin invites family members and grant permissions
through the address book in the app.
·The admin can set other family members as the admin. When all
admins unbind from the watch, it restores to factory seings.
·Procedure:
1) Properly insert the SIM card.
2) Ensure that the baery is suicient. If the watch cannot start up
due to insuicient baery, connect the watch and the charger
using a magnetic charging cable. Charge the watch for more than
15 minutes.
3) Scan the QR code in the app to activate the watch.
·If the activation fails, check the following:
1) Check whether the watch is powered on.
2) Ensure that the SIM card is not suspended and under the signal
coverage.
Charging jack Auto aaching
Introduction and Declaration
The 360 Kids Watch includes the watch unit and the mobile client
software, which cooperate to fully provide phone functions. Please
read the operation instructions and the safety information in this
IMPORTANT
EN
-３-