360 E2 - Waterproof Performance Details

Do not throw the baery into a re, or place it in a hot place, as this
may cause the baery to catch re or explode.
If the baery has abnormal phenomenon such as heating,
deformation, discoloration, swelling, or liquid leakage during use,
charging or storage, please stop using it and contact the after-sales
service center to replace the baery to avoid safety problems.
·Waterproof performance
The water intrusion ability is tested according to the IEC60529-2013
standard under controlled conditions, and the waterproof rating of
the factory product is IPX8.
The waterproof performance of the watch is not a permanent
feature. To ensure normal functioning, please follow the instructions
below:
1) It is recommended not to wear the watch during bathing,
sauna, swimming and taking a hot spring bath.
2) Do not replace the SIM card or charge the product when it is not
dry.
3) Do not place the watch in an environment where water flows
(such as taps, water guns, etc.)
4) Do not immerse the watch in water for a long time.
5) Wipe the sweat on the watch in a timely manner.
6) Avoid falling or shocking the watch (it may damage the
waterproof performance).
7) Avoid contact with any liquid (such as wine, sea water, salt
water,detergent, etc.) other than clean water.
8) The waterproof performance of the watch is not a permanent
feature, and may deteriorate as the waterproof ring ages or
accidentally experiences shocks.
9) If the product is used in water, the touch screen and other
functions may not work properly.
NOTE:
Please use 360 authorised accessories
CAUTION:
Risk of explosion if baery is replaced with a dierent type. Do not
remove or aempt to remove the non-user-replaceable baery. If
you have a problem with the baery, please contact the customer
support service.
EN
-７-