DUA1640-5AAA02
6-4
C
HAPTER
6: U
SING
THE
C
OMMAND
L
INE
I
NTERFACE
Using the CLI
Menus
When you log on to the CLI correctly, the top-level menu is displayed,
as shown in Figure 6-1
. The unit description, unit name and unit
number are shown (
PS Hub 50
and
Marketing(1)
in this example).
Figure 6-1
Top-level menu
Use the CLI by selecting options from this menu and from the others
below it. Each menu option is accompanied by a brief description of
what that option does.
CLI Menu Structure
Figure 6-2
shows the menu/command structure for the CLI.
Figure 6-2
CLI Menu Structure
From the top-level menu, you can access two sub-menus:
■
IP Menu
— From here, you can configure IP parameters.
■
System Menu
— From here, you can view system configuration,
configure CLI parameters, change your password, reset and
initialize the hub.
To Next Page
Loading...
