System Configuration
25
Channel / Frequency
Select the channel for your wireless LAN in Channel/Frequency
block. The default setting is SmartSelect it selects the channel
which provides the best transmission quality. The frequencies
available vary depending which wireless mode you select.
Current Profiles
A maximum of 4 profiles can be configured. Check the Enable
button to activate a profile. Click the Edit button to change its
configuration.
SSID
Service Set Identifier. This is the assigned name for a wireless Wi-Fi
network. Stations must use this unique identifier to communicate
with an Access Point. The SSID can be any alphanumeric entry up
to a maximum of 32 characters.
BSSID
Basic Service Set Identifier. This is the assigned MAC address of the
station in the access point. This unique identifier is in Hex format
and can only be edited when Multi BSSID is enabled in the previous
screen.
Suppressed SSID
If you want to disable the broadcast of your SSID, you should check
the Suppressed SSID box. It also calls SSID Broadcast disable or
Hide SSID.
VLAN ID
If your network uses VLANs, you can assign an SSID to a VLAN, and
client devices using the SSID are grouped in that VLAN.
To Next Page
Loading...
