System Configuration 23
System Configuration
In this section, you will learn how to configure the basic
functions of your AP.
Setup Wizard
The Setup Wizard will walk you through setting up the AP. To
start the Setup Wizard, click Setup Wizard.
1Figure8 allows you to set up the following information:
■ SSID (Service Set Identifier) – This is the name of wireless
network. Input 1-32 characters
■ Wireless Mode – Choose the required network mode from
the drop down menu.
■ Standard Channel – Choose a channel from the drop down
menu or select SmartSelect (recommended) to let the device
select a channel.
To Next Page
Loading...