Syslog Function 51
Syslog Server
Enter the IP address of the server that receives the error
information. The default IP address is 0.0.0.0
Syslog Port
Enter the port number that your server can be accessed by. The
default port number is 514.
Syslog Level
Choose from the following levels, listed in order of severity of the
detail to be recorded. The default setting is Error.
■ Emergency - System is unusable
■ Alert - Action must be taken immediately
■ Critical - Critical condition
■ Error - Error condition
■ Warning - Warning condition
■ Notice - Normal, but significant condition
■ Informational - Informational messages
To Next Page
Loading...