EasyManua.ls Logo

3Com 3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access Point - Beacon Interval; Data Beacon Rate; Association Timeout; Fragment Length

3Com 3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access Point
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 System Configuration
Beacon Interval
Choose an interval time between 25ms and 1000ms for each
beacon transmission. The default is 100ms.
Data Beacon Rate
The Delivery Traffic Indication Message (DTIM). Specify the data
beacon rate between 1 and 255. The default is 1.
Association Timeout
Set the value for the maximum time allowed for a wireless
association to be established. When this time is exceeded, the
connection is lost. The default value is 5 mins.
Fragment Length
Specify maximum packet size used for fragmentation. Packets
larger than the size programmed in this field will be fragmented.
The Fragment Threshold value must be larger than the RTS
Threshold value. The default is 2346.
RTS/CTS Threshold
Request To Send threshold. Specify the packet size used to
determine if it should use the CSMA/CA mechanism or the
CSMA/CD mechanism.

Table of Contents

Related product manuals