3Com 4200G PWR - Page 24

24 3Com Switch 4200G Family
Command Reference
mac-authentication
Use the mac-authentication command to enable centralized MAC address authentication globally (current
device) or on specified ports.
System view
Ethernet Port view
mac-authentication authmode
Use the mac-authentication authmode command to set MAC address authentication mode.
System view
mac-authentication authpassword
Use the mac-authentication authpassword command to set a password for MAC address authentication
when the fixed mode is adopted.
System view
mac-authentication authusername
Use the mac-authentication authusername command to set a user name when a switch authenticates
users in fixed mode.
System view
mac-authentication domain
Use the mac-authentication domain command to configure an ISP domain for centralized MAC address
authentication users.
System view
mac-authentication timer
Use the mac-authentication timer command to configure the timers used in centralized MAC address
authentication.
System view
management-vlan
Use the management-vlan command to specify the management VLAN on the switch.
System view
management-vlan synchronization enable
Use the management-vlan synchronization enable command to enable the management VLANs of the
member devices of a cluster to be synchronized.
Cluster view
mdi
Use the mdi command to set port MDI attribute.
Ethernet Port view
messenger
Use the messenger time command to enable or disable the messenger alert and configure the related
parameters.
ISP Domain view
mirroring group
Use the mirroring-group command to configure the port mirroring group.
System view
mirroring-group mirroring-port
Use the mirroring-group mirroring-port command to configure the monitored port.
System view
mirroring-group reflector-port
Use the mirroring-group reflector-port command to configure a reflector port.
System view
mirroring-group remote-probe vlan
Use the mirroring-group remote-probe vlan command to specify the remote-probe VLAN for a given
mirroring group.
System view
mirroring-port
Use the mirroring-port command to configure a mirroring port.
Ethernet Port view
mkdir
Use the mkdir command to create a directory on the remote SFTP server.
SFTP Client view