Need help?Do you have a question about the 3Com Baseline 2426-PWR Plus and is the answer not in the manual?
Details on how to properly connect and power the switch unit.
Step-by-step guide for installing an SFP transceiver into the switch slot.
Instructions to launch the discovery utility from the product CD-ROM.
Steps to log in to the web interface using default admin credentials.
Access to administrative functions like IP, backup, firmware, and system settings.
How to assign static or DHCP IP addresses to the switch.
Wizard to configure IP settings, system name, location, and contact information.
Installs new system firmware releases onto the switch.
Resets the switch to its original factory default settings.
Manages user accounts and implements password protection for the interface.
Organizes ports into separate broadcast domains for network segmentation.
Configures Power over Ethernet settings for connected devices.
Configures port speed, duplex, flow control, aggregation, and mirroring.
Bonds multiple ports into a single group to increase bandwidth and throughput.
Configures Quality of Service (QoS) settings for Voice over IP (VoIP).
Configures RADIUS Client and 802.1X authentication settings.
Configures remote authentication using RADIUS for network access.
Configures port-based access control for network authentication.
Restores the switch to its original factory default settings.
Addresses common issues encountered during switch installation and operation.
To Next Page
General