40 CHAPTER 4: CONFIGURING THE SWITCH
Remove User
To remove a user from the Switch, click on the
user name, then click Remove.
Figure 18 Remove User Screen
System Time
Click Administration, then System Time on the
menu. This screen allows you to set the system
time. You can set the Year, Month, Day, Hours,
Minutes, and Seconds.
Figure 19 System Time Screen
SNMP
Simple Network Management Protocol (SNMP)
is a communication protocol designed
specifically for managing devices on a network.
Equipment commonly managed with SNMP
includes switches, routers and host computers.
SNMP is typically used to configure these
devices for proper operation in a network
environment, as well as to monitor them to
evaluate performance or detect potential
problems.
Click Administration, then SNMP on the menu.
A screen appears with four tabs:
■ Summary
■ Setup
■ SNMP Add
To Next Page
Loading...
