62 CHAPTER 4: CONFIGURING THE SWITCH
Figure 49 Port Mirroring Setup Screen
To set up port mirroring:
1 Connect a network analyzer to a port.
2 Access the Web interface. Click Port, then Port
Mirroring on the menu. The Port Monitoring
Setup Screen appears.
3 Select the port number under Monitor Port to
which you want to monitor. Traffic to and from
this port will be forwarded to the analyser port.
4 Select the port number under Analyser Port to
which you connected the network analyzer.
Traffic to and from the selected mirrored ports
will be forwarded to this port.
5 Under Mirror Type, select to monitor incoming
traffic, outgoing traffic, or both.
6 Click Apply.
Statistics
The Switch allows you to statistics of a
particular port.
Figure 50 Port Statistics Screen
To display statistics for a port:
1 Access the Web interface. Click Port, then
Statistics on the menu. The Port Statistics
Screen appears.
2 Select the a port, and enter a refresh interval.
To Next Page
Loading...
