80 CHAPTER 6: UPGRADING SOFTWARE
The following steps enable you to backup each Switch in the fabric:
1 To back up the default configuration file on each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.def
unit1>flash:/030100cfg.def
Replace unit1 with unit2 and so on for each Switch in the fabric.
2 To back up the active configuration file on each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.cfg
unit1>flash:/030100cfg.cfg
Replace unit1 with unit2 and so on for each Switch in the fabric.
3 To back up the Web user interface file on each Switch in the fabric, enter:
copy unit1>flash:/s3p03_01_00.zip
unit1>flash:/030100http.zip
Replace unit1 with unit2 and so on for each Switch in the fabric.
TFTP To upgrade software to your Switch via TFTP do the following:
1 To download the application file, enter:
tftp aaa.aaa.aaa.aaa get s3n03_01_00s168.app
(where aaa.aaa.aaa.aaa is the IP address of the TFTP server)
s4n indicates the Switch filename, see Table 17 for further details:
Table 17 Switch 4500 Filenames
2 To download the Web user interface file, enter:
tftp aaa.aaa.aaa.aaa get s3p03_01_00.zip
3 To download the default configuration file, enter:
tftp aaa.aaa.aaa.aaa get 3ComOScfg.def
4 To download the bootrom file, enter:
tftp aaa.aaa.aaa.aaa get s3o002_012_000.btm
Filename Prefix Switch
s3n SuperStack 3 Switch 4500 software
s3o SuperStack 3 Switch 4500 bootrom software
To Next Page
Loading...
