3Com 5500-SI - Page 21

3Com Switch 5500 Family 21
Quick Reference Guide
display qos-interface traffic-statistic
Use the display qos-interface traffic-statistic command to view the traffic statistics information.
Any view
display qos-profile
Use the display qos-profile command to view QoS profile configuration information.
Any view
display queue-scheduler
Use the display queue-scheduler command to view queue scheduling mode and corresponding
parameter configuration
Any view
display radius
Use the display radius command to view the configuration information of all RADIUS schemes or a
specified one.
Any view
display radius statistics
Use the display radius statistics command to view the statistics information of RADIUS packet.
Any view
display remote-ping
Use the display remote-ping command to display the test results.
Any view
display resilient-arp
Use the display resilient-arp command to view resilient ARP state information of the units, the resilient
ARP packet-sending VLAN interfaces.
Any view
display rip
Use the display rip command to view the current RIP running state and its configuration information.
Any view
display rip interface
Use the display rip interface command to display information about RIP interfaces.
Any view
display rmon alarm
Use the display rmon alarm command to view RMON alarm information.
Any view
display rmon event
Use the display rmon event command to view RMON events.
Any view
display rmon eventlog
Use the display rmon eventlog command to display RMON event log.
Any view
display rmon history
Use the display rmon history command to view the latest RMON history sampling information (including
utility, error number and total packet number).
Any view
display rmon history unit
Use the display rmon history unit command to collect RMON history data of a specified fabric unit.
Any view
display rmon prialarm
Use the display rmon prialarm command to display information about extended alarm table.
Any view
display rmon statistics
Use the display rmon statistics command to display RMON statistics.
Any view
display rmon statistics unit
Use the display rmon statistics unit command to collect RMON statistics data of a specified fabric
unit.
Any view
display route-policy
Use the display route-policy command to view the configured Route-policy
Any view