3-28
Figure 3-51 View online clients
Configuration guidelines
When configuring 802.11n, note that:
z To modify the 802.11n radio setup and 802.11n rates, shut down the radio first.
z Select Radio > Radio from the navigation tree, select the AP to be configured, and click the
corresponding
icon to enter the radio configuration page, where you can modify the
802.11n-related parameters, including Bandwidth Mode, A-MSDU, A-MPDU, Short GI, and
Client 802.11n Only (permitting only 802.11n users to access the wireless network).
z Make sure that 802.11n (2.4GHZ) is enabled.
z Select Radio > Rate from the navigation tree to modify the 802.11n rate.
z When satisfied with the configuration Save Configuration to File to ensure it is not lost when the
Access Point restarts.
To Next Page
Loading...
