1-1
z The displayed web pages may vary depending on your device model.
z If a function or parameter is grayed out, it is either not supported or cannot be modified.
z The Console default setting is 9600, 8, N, 1.
1 Interface Logging In to the Web
Log
age when the device starts with the null configuration, you need to
r login, and then click Apply, as shown in
ging In to the Web Interface
To enter the web configuration p
select the country/region code afte
Figure 1-1.
Figure 1-1 Select a country/region
The device is provided with the default Web login information. You can use the default information to log
eb login information is:
s Enter
and you can enter the login page of the Web interface, as shown in Figure 1-2
in to the Web interface. The default W
z Username: admin
z Password: password
z IP address of the device: 192.168.0.50.
On the PC, open the browser, type the IP address http://192.168.0.50 in the address bar, pres
. Input the username
admin, password password, and the verification code, select the language, and click Login.
To Next Page
Loading...
