18
Ethernet Hub 8 and 8C—Rear
Power Adapter socket
Only use the power adapter that is
supplied with this OfficeConnect
hub. Do not use any other adapter.
10BASE-2 port (Hub 8C only)
Can be used to connect your hub to other OfficeConnect hubs
and equipment with 10BASE-2 cabling.
If used, it is effectively a ninth port.
Refer to “Connecting Hubs Using 10BASE-2” on page 20.
Uplink/Normal switch
Affects the operation of port 8. For correct usage,
refer to “Connecting Hubs Using 10BASE-T” on page 21.
Eight 10BASE-T RJ-45 ports
Use 10BASE-T cable with RJ-45 connectors. You can
connect the OfficeConnect hub to any workstation or
piece of equipment that has a 10BASE-T port. Port 8 can
be used to link to another OfficeConnect hub. Refer to
“Connecting Hubs Using 10BASE-T” on page 21.
POWER COAX
Uplink/Normal
1x
8
3C16700.book Page 18 Tuesday, July 13, 1999 9:59 AM
To Next Page
Loading...
