Router 3016 15
Figure 6 illustrates the back panel of the Router 3016.
Figure 6 Back Panel of the Router 3016
System Specifications Tabl e 14 lists system specifications for the Router 3016.
LEDs Tabl e 15 lists and describes the LEDs on the Router 3016.
OFF ON
DC12V
CON AUX100METH
CT1/PRI
Power
switch
Power
input
socket
CON
port
AUX
port
100M
Ethernet
port
Grounding
screw
CT1/PRI
port
Tab le 14 System Specifications for the Router 3016
Item Description
Port 1 console port
1 10/100Mbps Ethernet interface
1 AUX port
1 CT1/PRI port
Processor MPC860T 50MHz
SDRAM 64 MB
Flash memory 8 MB
Maximum power 20 W
Power supply (external) Input voltage and frequency: 100 to 240V AC (the actual range can
be 80 to 264 V) 50/60 Hz
Input current: 0.5A to 1A
Output voltage: 12V
Output current: 4A
Dimensions (W X H X
D, the highest arc
points of the plastic
panel)
251mm X 42.5 mm X 187mm (9.9in X 1.7in X 7.4in)
Weight 0.75kg (1.65lb)
Operating temperature 0 to 40
0
C (32 to 104
0
F)
Operating humidity 5 to 85% (noncondensing)
Tab le 15 Router 3016 LEDs
LED Description
POWER Off means that power is not being supplied.
Green means that power is being supplied.
100M ETH Off means that the link is not connected.
Flashing green means that data is being sent from or to the Ethernet
interface.
T1-LNK Off means that the link is not set up.
Green means that the link has been set up.
To Next Page
Loading...
