3Com SuperStack 3 Quick Reference Guide

3
Web Interface Device Mimic
For example purposes only, this graphic shows a Switch 4400 PWR.
A Quick Guide to the Web Interface Operations
This table describes the operations that are available in the Web Interface.
Operation What does the Operation do?
System Getting Started Guides you through the initial configuration of the stack.
System Console Setup Configures the type, speed and flow of a console port.
System Control Initialize Initializes every unit in the stack to factory default settings.
System Control Reboot Resets all units in the stack simultaneously.
System Control Software Upgrade Upgrades the software on all units in the stack.
System Management Setup Changes information for the stack.
System Management Alert Create Creates and defines an email alert and its distribution.
System Management Alert Modify Modifies an existing email alert and its distribution.
System Management Alert Test Sends a test email alert.
System Management Alert Delete Deletes an existing email alert.
System Management Alert Summary Displays summary information for configured email alerts.
System Management Monitor Modify Sets up a device or port to be monitored for email alerts.
System Management Monitor Summary Displays summary information for devices or ports on which
monitoring is enabled.
Unit
Setup
Statistics
Port Security
Name
Notepad
History-1 Hour
History-48 Hours
Port Setup Summary
Setup
Setup

3Com SuperStack 3 Specifications

General

Model	SuperStack 3
Category	Switch
Form Factor	Rack-mountable
Ports	24 or 48
Layer	Layer 2
Management	Web-based, SNMP, CLI
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	10% to 90% non-condensing
Uplink Ports	Varies by model (e.g., 2 Gigabit ports)