3Com SuperStack 3 Quick Reference Guide

4
System Telnet Connect Starts a Telnet session to the stack in a separate window.
System Unit Name Assigns a name to the unit.
System Unit Notepad Opens a notepad for the unit.
System Backup Configuration Save Saves the current configuration of the stack to a file.
System Backup Configuration Restore Restores the configuration of the stack from a file.
System Cache Config Add Cache* Adds the IP address of a Webcache to the network.
System Cache Config Modify Cache* Modifies the Webcache information.
System Cache Config Remove Cache* Deletes a Webcache from the network.
System Cache Config Change TCP Port* Specifies the TCP Port number for traffic to be redirected to a
Webcache.
System Cache Config Summary* Displays summary information for a Webcache set up on the network.
Bridge Address Database Add Adds an address to the database.
Bridge Address Database Aging Time Configures the aging period for the address database.
Bridge Address Database Find Displays the location of a MAC address.
Bridge Address Database Remove Deletes an address from the database.
Bridge Address Database Summary Views all addresses that are stored against a particular port or
aggregated link.
Bridge Broadcast Storm Control Setup Configures Broadcast Storm Control parameters for the stack.
Bridge Link Aggregation Modify Add Port Adds a port to an aggregated link.
Bridge Link Aggregation Modify Admin State Changes the state of an aggregated link.
Bridge Link Aggregation Modify LACP State Enables or disables LACP on a port.
Bridge Link Aggregation Modify Partner ID Sets the Partner ID for an aggregated link.
Bridge Link Aggregation Modify Remove Port Deletes a port from an aggregated link.
Bridge Link Aggregation Summary Lists all of the aggregated links in the stack.
Bridge Multicast Filter IGMP SnoopMode Configures IGMP multicast learning for the stack.
Bridge Resilient Links Create Creates a resilient link on the stack.
Bridge Resilient Links Delete Deletes a resilient link that is configured on the stack.
Bridge Resilient Links Modify Sets the main or standby link on a resilient pair as the active link.
Bridge Resilient Links Summary Displays details of all resilient links that are currently configured on the
stack.
Bridge Spanning Tree Setup Configures stack-wide spanning tree parameters.
Bridge Spanning Tree Port Configures spanning tree per port.
Bridge VLAN Display/Edit Displays and modifies current VLAN configuration.
Physical Interface Ethernet History History-1 Hour Displays packet activity for all ports on a unit over the previous hour.
Physical Interface Ethernet History History-48 Hours Displays packet activity for all ports on a unit over the previous 48
hours.
Physical Interface Ethernet Setup Sets up single or multiple Ethernet ports.
Physical Interface Ethernet Smart Autosensing Configures smart autosensing for the stack.
Physical Interface Ethernet Statistics Displays statistics for packet and error traffic on one or more ports.
Physical Interface Ethernet Port Setup Summary Displays summary information for the stack.
Physical Interface Power Configure† Displays and modifies power allocation for each port.
Operation (Continued) What does the Operation do?

3Com SuperStack 3 Specifications

General

Model	SuperStack 3
Category	Switch
Form Factor	Rack-mountable
Ports	24 or 48
Layer	Layer 2
Management	Web-based, SNMP, CLI
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	10% to 90% non-condensing
Uplink Ports	Varies by model (e.g., 2 Gigabit ports)