Accessing the Setup Wizard 39
Wizard - Time and
Time Zone
The Time and Time Zone screen allows you to set up the time for the
Router.
Figure 25 Time and Time Zone Screen
1 Select the correct base date and time.
2 If you want to automatically synchronize the Router with a public time
server, check the Enable box in the Using Time Server (NTP) field.
3 Select the time zone in the Set Time Zone drop-down menu.
4 Enter the time in the Synchronization Interval field.
5 Select the desired servers from the Time Server drop-down menu.
6 Check the Enable box in the Daylight Savings field, if daylight savings
applies to your area.
7 Click Next.
To Next Page
Loading...
