40 CHAPTER 4: RUNNING THE SETUP WIZARD
Wizard - Connection
Type
The Connection Type screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Figure 26 Connection Type Screen
Select a mode from the following options, and click Next:
■ PPPoE — PPP over Ethernet, providing routing for multiple PCs,
see page 41
■ PPPoA — PPP over ATM, providing routing for multiple PCs,
see page 42
■ Bridge Mode (for a single PC) — RFC1483 Bridged Mode, see page 43
■ Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs,
see page 44
■ Dynamic/Fixed IP in 1483 Bridge Mode (For Multiple PCs) — see
page 45
For further information on selecting a mode see Internet Settings on
page 76.
To Next Page
Loading...
